MIRROR-WITH-LIGHTS-INSTALLATION-GUIDE

Installation Guide 1

Required Tools

INYOUTHS-MEASURING-TAPE

Measuring Tape

INYOUTHS-PENCIL

Pencil

INYOUTHS-POWER-DRILL

Power Drill

INYOUTHS-DRILL-BIT

Drill Bit

INYOUTHS-HAMMER

Hammer

INYOUTHS-PHILLIPS-SCREWDRIVER

Phillips Screwdriver

INYOUTHS-WALL-ANCHORS

Wall Anchors x2

INYOUTHS-SCREWS

Screws x2

Installation Guide 2

Just Four Steps

INYOUTHS-INSTALL-LED-MIRROR-MEASURE-MARK

STEP 1: Measure and mark.

WHAT WILL YOU NEED?
1. Measuring Tape.
2. Pencil.

LED mirrors can be installed horizontally or vertically. Please choose according to your needs.

a. Measure the distance from the hole to the bottom edge of the mirror.
b. Measuring hole distance.
c. Find the center point of the vanity.
d. Determine the height of the hole on the wall based on the distance from the hole to the bottom edge of the mirror measured earlier.
e. Determine the position of the holes on the wall based on the previously measured hole distances.

INYOUTHS-INSTALL-LED-MIRROR-INSTALL-MOUNTING-HARDWARE

STEP 2: Install mounting hardware.

WHAT WILL YOU NEED?
1. Power Drill.
2. Drill Bit.
3. Hammer.
4. Phillips Screwdriver.
5. Wall Anchors x2.
6. Screws x2.

a. Drill holes in the marked locations.
b. Install the wall anchors into the holes in the wall.
c. Install screws into wall anchors.

INYOUTHS-INSTALL-LED-MIRROR-CONNECT-WIRES

STEP 3: Connect the wires.

ATTENTION: Please turn off the power before installation.

Connect the household wires to the connectors.

INYOUTHS-INSTALL-LED-MIRROR-HANG

STEP 4: Hang LED mirror.

Installation is finished.