Aside from regularly cleaning your bathroom, you need to deep clean it occasionally. Deep cleaning your bathroom focuses on hard-to-reach and harder-to-clean areas you might not pay attention to during regular cleaning. There is a high probability that everything in your bathroom is rife with bacteria, causing stains, odors, and skin infections. As such, knowing some deep bathroom cleaning hacks is essential to keep the bathroom clean and bacteria-free.
Things like your faucets, showers, bathtubs, and toilets can be cleaned once a week, but you should aim to deep clean them at least once a month, depending on usage. Regular weekly cleaning keeps things tidy and prevents bacteria build-up, but your monthly deep cleaning addresses any problem areas. So, to bring the sparkle back to your bathroom, follow these bathroom deep clean checklist steps.
How To Clean a Bathroom Step-by-Step?
Deep cleaning a bathroom is easier than you might think. Generally, the best way to go about it is to first clear the clutter in the bathroom and clean it from the top down.
Follow our expert deep cleaning guide to clean a bathroom to make it germ-free and sparkling.
1. Gather your supplies
You will need a couple of items to start deep cleaning a bathroom. Items like a toilet brush, bristle brush, microfiber mop and vacuum cleaner are essential. You will also need cleaning agents like detergent, bleach, vinegar, and disinfectant.
2. Empty storage areas
If your bathroom has a storage area, remove everything in them. Clear out items in the drawers, cabinets, shelves, and cabinets. Remove the clutter, as well as anything else that’s standing in the way of a deep clean.
3. Throw linens into the washing machine
Remove all the linen in your bathroom, such as the plastic shower curtains, towels, rugs, bath mats, and window coverings. Throw in some baking soda with laundry detergent to refresh them.
4. Remove dust build-up from surfaces
The bathroom tends to have a lot of dust build-up, especially on the ceiling. Hence, remove the old dust from surfaces before you start wet cleaning. Use a vacuum or a broom to remove the dust from the ceiling, walls, and floor.
5. Apply cleaner
With the dust out of the way, apply the cleaner to eliminate the dirt and grime in your bathroom. Most cleaners work best when you allow them time to sit on the dirt and grime. Toilet cleaners with hydrogen peroxide are great for cleaning toilets, showers, and tubs. While for places like mirrors, faucets, shower doors, and other fixtures, opt for a multi-surface cleaner.
6. Steam up the bathroom
After applying a decent amount of cleaner to the surfaces, steam up the bathroom. The steam helps make the cleaner penetrate and loosen the caked-on mess of grime and dirt. Let the bathroom steam for approximately 10 minutes.
7. Clean exhaust fan, switches and outlets
When the bathroom is done steaming, start by cleaning the fan. Use a microfiber cloth and a warm soapy water mixture to remove the dirt that builds up around the fan. Next, clean all the electrical outlets and switches to loosen any gunk that might have built up over time. Ensure you turn off the circuit breaker from the main power supply before cleaning these parts of your bathroom to prevent a shock.
8. Clean the shower and tub
Next, put on some rubber gloves, and with a scrubber, sponge the tub, showerhead, faucet and shower wall of your bathroom. If there is limescale build-up in your shower head due to hard-water build-up, first descale the shower head. You can descale the shower head using vinegar to dissolve the limescale build-up.
To remove stubborn molds on your shower and tub, let hydrogen peroxide sit for about 15 minutes before scrubbing it properly and then rinsing it off with clean water afterwards.
9. Clean the tracks, blinds and window
The windows and tracks are spots hardly cleaned during a regular bathroom cleaning. So, during deep cleaning, wipe down the slats of the blinds with a microfiber cloth. Next, clean the window tracks with a stiff brush, and remove any remaining gunk. Also, wipe down the window frame.
10. Clean other flat surfaces
Wipe down other flat surfaces such as the vanity, mirror frame, countertops, and the interior and exterior of any cabinets and drawers in your bathroom with a microfiber cloth. A microfiber cloth is excellent because it’s much quicker to clean and does not scratch surfaces.
11. Scrub the toilet bowl and surrounding surfaces
With most parts of the bathroom, you can now clean the toilet bowl. Add some toilet cleaner and allow it to sit for a few minutes. Use a pumice to remove any build-up in your toilet, but be careful not to scratch the surface. Hence, use a soft brush to scrub around the base and lid bolts of the toilet. The bolts and base of the toilet are common places that hide gunk which is often why the bathroom gets smelly.
12. Clean bathroom floor
Deep cleaning of the bathroom floor depends on the type of flooring you have. Generally, most bathrooms come with tile flooring, which you will be fine with if you deep clean bathroom tiles with bleach. But if you have other types of flooring like marble or pebbles, take caution when choosing a cleaning agent. Remember to scrub the grout line. Mix baking soda and hydrogen peroxide to make the grout line white again. After cleaning the bathroom floor, rinse it properly and allow it to air dry.
Conclusion
Deep cleaning of the bathroom is essential in keeping it fresh and sparkling clean. It offers numerous benefits, especially keeping the bathroom germ free. So, add deep cleaning to your routine, so you never have to worry about a weird musty or pee smell and grime build-up. Follow these steps today to get your bathroom looking new again.
